I installed Backup Exec 2012 in Windows Server Enterprise 2003 SP2 32bit without errors.
But when i open console BE2012 then click the Backup Exec Button, the menu can not open.
I tried follow this links :
But the problem has still same.
How to fix this issue?
- Jajang -
What I've done is probably wrong, but done out of necessity to deal with diskspace and bandwidth.
I back up an application to disk in a folder called BACKUP. Every day, I copy the contents of BACKUP to an external drive, putting BACKUP into folders named Monday, Tuesday, Wednesday, etc etc.
I need to restore something from last Friday. I moved the contents of BACKUP into a temp folder. (That's the files from the latest backup.)
Then I copied the files from the external drive/Friday/BACKUP into BACKUP.
I can not get Symantec Backup Exec 12.5 to restore from the contents of BACKUP. When I create a restore job, it shows contents of the last backup job, not the older files copied into the folder BACKUP.
I've run an inventory on the folder BACKUP. Restore still shows the wrong contents.
How do I get Restore to backup from the backup files I want it to use?
Desperate.
Thanks for any advice and instruction on how to get the files I need.
Stephen
We run BackupExec 2012 and Exchange 2010.
Trying to backup the server to our De-Duplication storage area on our Equalogic SAN.
I have setup a one off backup job to backup EVERYTHING.
The backup job starts at speeds around 3000 MB/min, but tails off and runs at about 300 MB/min. The backup job is currently on 10hours and has backed up 186GB.
No other backup jobs are running. The backup exec server and the exchange server are not showing as struggling with memory, cpu, network at any point.
Any ideas?
Does any one know, of have experience in setting up Backup Exec 2012 to connect directly to the Equallogic SAN Device.
We are wanting to use replicated/shared storage opton so backups are automatically available at both our backup exec servers over our san.
Bonjour,
j'ai un gros souci qui devient très critique, je n'ai plus de sauvegarde sur le serveur depuis 1 semaine suite à cette erreur :
J'utilise Backup Exec 2010
Erreurs de sécurité
Erreur : e0000383 - Echec de la connexion à Microsoft Windows
Vérifiez si vos informations d'authentification sont correctement saisies et qu'elles remplissent les conditions minimum pour la connexion à un ordinateur Windows :
- Les informations d'identification fo
Pour plus d'informations sur cette erreur, reportez-vous au lien V-79-57344-899
Merci deme dire comment je vpeux résoudre ce problème ?
Cordialement
Sandra VILACA
When we boot our MMS the DeDuplication Engine Service stays "Starting" and prevents logon to the server.
We cannot stop the service, and a reboot just repeats the problem.
BackupExec 2012 and Windows 2008 Rs 64 Bit.
Hi Guys
I am looking to see if anyone can recommend a cloud provider solution for backing up.
I am trying to gather requirments as we do not have a set DR office and physical space for hardware is restrictive.
We do have local storage for daily backups , but I want to duplicate the fulls to the cloud for compliance within my company.
If anyone is using such a service I would love to hear your thoughts.
Thanks
Fergal
I'm facing a phenomen, which I can't explain and understand - maybe somebody can help me ?!
Problem:
We're using DeDuplication for the firststage-backup, afterwards the data is copied to external media - this time USB-disks.
During the copy-job from the Dedup-folder onto USB-disks (one active) the speed is between 950 and 1250 MB/min - not very fast but ok.
The USB-Disks are attached via USB3 and only one concurrent job os allowed to be written onto the USB-disks.
Now the strange thing starts:
When a second job starts while another is running, the speed drops to 250-400 MB/min.
But the second job can't really start as long as the first one isn't finished (because only 1 concurrent write is allowed to the usb-disc), so imho it shouldn't take any performance from the system.
Why does the speed drops, when the second job doesn't really do anything (because the target-device is blocked)?
Environment:
BE2012 with actual updates. The hardware is a HP DL180G6, CPU: E5606, 12 GB RAM. 5 SAS 1 TB Harddisks attached to an HP SmartArray P410 with 256 MB Cache and battery. CPU usage below 50%, RAM-usage ~ 50%.
Comparison to normal B2D-job:
A copy-job from a "normal" B2D-device (located on the same disk-channel) runs with 2.000-2.500 MB/min (which means the disc and usb-channel isn't the bottleneck). So the Dedup-device takes about 50%performance for rehydrating the data - which is "as designed and ok.
Any idea ?
Hi All
I need to get a backup solution to secure the following:
Windows 2008 (32 bit)
SQL 2005
SQL 2008
I was thinking of Backup Exec 2012 for Small Business as this has the SQL agent, but will it run on Windows 2008 Standard (32bit), and also will it allow me to backup/restore the two SQL systems? The 2008 is the free express version
kind regards!
rob
I have a MS Server 2008, SQL 2012 server I've been backing up for a while now. Basically, I configured a Full backup job to run nightly followed directly by an Incremental job to fullfill the Logs backup requirement. These backups go to a virtual tape library then get dumped to tape automatically after an eject of the virtural tape occurs. So, I set the Inc job to eject the tape. The requirement here being I need a nightly full backup to disk, then tape. Problem is... Just the other day, the Incremental job just won't run anymore, no error, doesn't even show up in the log even though it's clearly scheduled. Is there some unstated rule in BE2012 that it doesn't run a second Incremental stage if a Full backup occurs? I'd expect an error or a skipped job message to at least indicate what happened. It's just odd. Like I said, it WAS working then just quit last week. I even deleted the old job and created a new to see if that was the issue with no luck. Anyone have any ideas?
Thanks
Hello,
we had to completly reinstall our backup server in case of file system issues in windows.
After reinstall Windows 2008 R2 SP1 and Backup Exec 2012 SP1a (with a new database) we
wanted to import our previous deduplication pool. Everything works fine but there are now backup sets
listed under the deduplication device pool entry. Only entrys from new backups which run after the import are listed.
An Inventory has been done. The old Catalogs files are copied to the new installation.
A restore from old backups sets even works fine.
What can we do?
Kind Regards
Michael
Hello!
I'm looking for a solution. After the failure of our tape library HP MSL 2024 (tape drive was replaced), I began to receive messages in the Event manager:
34326 - Catalog index database
34338 - ODBC access error. Possible lost connection to database or unsuccessful access to catalog index in the database.
I did not notice the warnings, and and the job continues to run on schedule.
After that i got some new errors:
33152
Adamm Mover Error: DeviceIo: 03:00:04:00 - Device error 1117 on "\\.\Tape0", SCSI cmd 08, 23 total errors
%2
%3
%4
%5
%6
%7
%8
Adamm Mover Error: DeviceIo: 00:00:04:00 - Retry Logic: Retry logic was engaged on device: HP Ultrium 3-SCSI
%2
%3
%4
%5
%6
%7
%8
57612 - Format inconsistency was encountered during a read tape device "HP 3".
btw, backup terminates not immediately, after a while (about 1 hour, or 20 min).
What I've done.
1- http://www.symantec.com/business/support/index?pag...
2- http://www.symantec.com/connect/forums/help-odbc-a...
errors continue
what to do with Adamm Mover Error i dont know.
All tests in HP LTT is ok. All cartridges are workable.Some advices?
Good afternoon
I installed recently a Symantec Backup Exec 2012 on Oracle server, to backup the oracle database.
But i have a error message when i run a job :"The job failed with the following error: This server name is not in Backup Exec server's authentication list. Enter the server's fully qualified domain name and logon account into the Backup Exec server's authentication list. Server names in the authentication list are case-sensitive".
I am running backup exec 10r and upgrading to backup exec 2012 standard. My question is: version 10r is installed on the C partition and I would to install 2012 on a different partition can i do this and policies on 10r will be imported to 2012 version?
Hi All,
I have never used the BE 2012 SDR to recover a complete server before. I do run an SDR backup on a few of my servers though. I have a test box I am trying to restore a SDR backup to. I have made the recovery boot disk from within BE and created the .ISO file to burn a CD disk image.
The recovery disk boots and installs and starts the network drivers and I can see the BE media server.
I can see the recovery point on the media server I want to recover. I can select that recovery point and it brings me to the disk layout.
This is where I have trouble. First the disk layout (Volumes) screen that shows first is blank. Under Preview I show my unformatted disk with no partitions.
So it doesn't matter if I check the box that says erase the partitions and replace or not.
If I go into advanced disk layout, it shows me what I believe is my orginal disk layout for the server I am trying to recover. I can create partitions on the disk layout there.
When I return to the volumes screen it is still blank and I can not click "next" as it is greyed out.
I thought well maybe it doesn't have my raid controller driver loaded. So I went out to the first screen and to utilitites and loaded the specific RAID controller drivers. Then went through the wizard steps again until I get to the disk congiuration, and volumes show blank still. If I go back into advanced I can again create and format partitions, but still no way to click next on the disk config screen to go further.
Since I have never run through this procedure before, I feel I must be missing some little thing that would let me continue. But honestly I don't really know what to expect for any of these screens.
What I think I should expect in the disk config screen (I think it has been refered to as the quick view) is what my disk currently looks like. This would then make the check box to erase what ever is showing and replace it with what the recover needs. But in every case it doesn't show anything in this view.
Have I missed something some place?
Any help will be appreciated.
Sincerely,
Kevin Pulford
System Administrator
Harmon City, Inc.
scenario:
Full backup B2D on friday at 8pm (Keep for 4 days option) than duplicate Full to Tape
In BackupSets page I see Expiration Date for Storage Disk correctly after 4 days, BUT Expiration Date for Storage Tape after 11 days.
Diff backup B2D from mon-thur at 8pm (Keep for 4 days option) than duplicate Diff to Tape...
In BackupSets page I see Expiration Date for Storage Disk correctly after 4 days, BUT Expiration Date for Storage Tape after 11 days.
How is "Expiration Date for Storage Tape" calculated???
DLM can't remove correctly Storage to disk and delivery free space on volume disk use for backup, until this Expiration Date for Storage Tape is ...
Dears,
Kindly I have Tape Library MSL 2024 connected to symantec Backup Exec 2012, and i have 24 Tapes (3 TB).
Can anyone help me for the best strategy and usage of the tape library in my case? . How can i deal with them to get the best practice? As it is my first time to deal with tape libraries :)
Regards,
Ahmed
Hi All,
I have problem restore with symantec BE 2012, convert DC (Domain Contoller) and ADC (Additional Domain Controller) from backup to vmware successfully, DC and ADC can running well. I tried create new user from DC, and i crosceck from ADC, it is successfully...
But the problem if i try join domain for my PC Client, join domain alway failed, bellow the error
Please Help Me...
now i got exact way to proceed with weekly backup.
Now my concern is has you said that we should give server1 two jobs to perfrom backup on alternative weeks, then how to configure incremental job to run on daily purpose either we have to give incremental on job1 or job2 or in both the jobs.
